Integrate with Covs/PROlink

Before you start please make sure you have your PROlink account and login information.

You will require:

    • Site Code
    • Account Number
    • Account Suffix (this will always be ‘0001’)
    • Covs Username and Password

You can obtain your Covs account information from PROlink as follows:

Go to the top left-hand corner of your PROlink account, you can obtain the following:

Account Number’ = is the first 7 digits of the number

Account Suffix’ = 0001 is the Account Suffix

You can obtain your Site Code by clicking on ‘Admin’ in the top right-hand corner, then selecting ‘Site Settings’.

Integrating with Workshop Software:

1. Using the menu on the left-hand side of Workshop Software, click ‘Integrations’.

2. Then click on ‘Automotive Integrations‘.

3. In the additional menu list that appears, please select ‘PROlink‘.

4. You will be asked if you want to ‘Activate PROlink’. Please select the green ‘Activate PROlink’ button to continue.

5. You will also be asked if you are sure you want to activate PROlink. Please select ‘Yes

6. Enter PROlink account information and click ‘Save’.

7. Open or create a job in Workshop Software.

8. Scroll down to parts and select the ‘PROlink‘ icon.

9. The browser will take you to the PROlink site login page.

10. Input the PROlink/Covs login details and click ‘LOGIN

11. You will be required to activate the computer. This now links the Repco NavigatorPro to this workstation. Click ‘Activate’.

 We haven’t seen any edits for a while. Still working? 

How to Set up Covs/PROlink.

Before you start – Obtaining your PROlink details:

Please make sure you have your PROlink account and login information.

You will require:

Site Code

Account Number

Account Suffix (this will always be ‘0001’)

Covs Username and Password

You can get your Covs account information from PROlink as follows:

Go to the top left-hand corner of your PROlink account, you can obtain the following:

‘Account Number’ = is the first 7 digits of the number

‘Account Suffix’ = 0001 is the Account Suffix

You can obtain your Site Code by clicking on ‘Admin’ in the top right-hand corner, then selecting ‘Site Settings’.

Integrating with Workshop Software:

1.         Using the menu on the left-hand side of Workshop Software, click ‘Integrations’.

2.        Then click on “Automotive Integrations’.

3.         In the additional menu list that appears, please select ‘PROlink’.

3.         You will be asked if you want to ‘Activate PROlink’. Please select the green ‘Activate PROlink’ button to continue.

4.         You will also be asked if you are sure you want to ‘activate’ PROlink This is correct, please select ‘Yes’.

5.         Enter PROlink account information and click ‘Save’.

6.         Open or create a job in Workshop Software.

7.         Scroll down to parts and select the ‘PROlink’ icon.

8.         The browser will take you to the PROlink site login page.

9.         Input the PROlink/Covs login details and click ‘login’.

10.       You will be required to activate the computer. This now links the Repco NavigatorPro to this workstation. Click ‘Activate’.

Please note: You will only be required to carry out this process once.

11.       You are now linked with the PROlink system.

12.       Close the PROlink browser tab.

13.       Open Workshop Software in a new browser tab (make sure you have closed the existing PROlink browser tab or Workshop Software will not reopen).

Please note: Should you wish to use PROlink on another workstation, please repeat steps 9 & 10 on the alternate workstation. Please note, this will ‘deactivate’ the original machine with PROlink.

Was this helpful?