How To Integrate Burson Ezyparts

Automotive IntegrationsUpdated 17 Nov 20266 min read

Integrating Burson Ezyparts with Workshop Software streamlines Product creation and connects the two systems so data flows between them without manual entry. Once set up this integration saves time and reduces the chance of errors when working across platforms. Follow the steps below to configure the integration.

With this integration, you can:

  • Create a job or quote, then log directly into your Burson account to check part prices.
  • Add parts to your order and return them to Workshop Software.
  • Once a quote is approved, order the parts directly from Workshop Software without switching tabs or copying item numbers.

Requirements for Integration

To integrate Burson with Workshop Software, you will need your:

  • Username
  • Password
  • Account Number

You can obtain this information from your Burson Representative or by calling Burson Support at 1300 733 849.

Step-by-Step Integration Process

Enable Workshop Software in Burson Ezyparts

To correctly Order parts using the Burson Integration you must set "Workshop Software" as your Nominated Workshop Management System inside Ezyparts.

  • To check or change this setting open Ezyparts, click the Account tab (1) and choose Account Configuration (2) in the left hand sidebar menu.
  • In the Nominated Workshop Management System field select Workshop Software and click Update (3).
A screenshot of the Burson Ezyparts website with numbered cursors indicating how to access the Nominated Workshop Management System option.

Connect Burson to Workshop Software

To access the Burson integration click Integrations (4), Automotive (5) then Burson Ezyparts (6) in the left hand sidebar menu.

Screenshots of Workshop Software's left hand sidebar menu. Numbered cursors indicate to click Integrations, Automotive, Burson Ezyparts.


You’ll see a prompt to activate Burson. Click the Activate EzyParts button to proceed.

An image of the Burson EzyParts Integration card before activation. The Activate EzyParts button is highlighted.

Configure Burson
To configure your Burson Ezyparts integration you will need to choose a Workshop Software Supplier, enter your user credentials and choose how prices are updated when a Burson part is Ordered. You may also turn on a function that downloads Burson Invoices automatically.

Please Note: You must complete all fields in this card before Saving. If fields are not complete your Burson integration will not connect and may prevent other system settings from being updated.

A screenshot of tje Burson Ezyparts Settings card. The individual fields are highlighted with letters explained in the document text.


Burson Ezyparts Supplier (A): Choose an existing Burson Supplier record in Workshop Software or create a new one if necessary.
Username (B): Your Burson username.
Password (C): Your Burson password.
Account Number (D): Your Burson account number.

Change Price Option

When a Burson part is added to an Invoice or Ordered Workshop Software will compare the Workshop Software price to Burson's price. This drop down menu (E) selects how your Workshop's pricing is updated from this comparison.

A cropped screenshot of the Change Price Options drop down Menu.

  • Don't change the price: Your Retail Price stays as it is.
  • Update to Burson price, if price is different: Your Retail Price changes to the Burson price whenever the two are different.
  • Update to Burson price, if price higher in Burson: Your Retail Price changes only when the Burson price is higher. A lower Burson price is ignored.
  • Always use Burson Price: Your Retail Price always changes to the Burson price.

Once you have chosen any option, the price on the new line matches the Product's Retail Price after the option has been applied. For example, with Dont change the price, a part with a Retail Price of $100.00 comes onto the line at $100.00, even if Burson quoted $120.00.

Auto Download Invoice

When this toggle (F) is set to yes and Burson have been notified to enable "Electronic Invoicing for Workshop Software" Invoices will automatically be imported as Open invoices and ready for Processing in the designated Burson Ezyparts Supplier's list of Invoices.

A screenshot of the Auto Download Invoices toggle when activated, including a message indicating the users should contact Burson after enabling.


Please Note: If Burson Invoices are downloaded automatically you MUST Process each invoice and log that payment has been made regularly, otherwise a large backlog of Open invoices will be collected on your assigned Burson Supplier record.

Once you have entered your information click the Save button.

A cropped screenshot of the Burson Ezyparts Settings card, the Save button is highlighted.


Your Burson integration is now active in Workshop Software. This guide explains how to Order Parts with the Burson Integration.

For any additional support, please contact Burson Support at 1300 733 849.

Good to Know

  • Make sure you click Save after making your changes. If you navigate away before saving, your changes will be lost.
  • If you experience any issues during setup, contact the Workshop Software support team for assistance.
  • Keep your integration credentials secure. Do not share API keys or passwords with anyone outside your organisation.

Frequently Asked Questions

What do I do if the integration is not working?
First, check that your credentials are entered correctly and that both systems are accessible. If the issue persists, check the event log in Workshop Software for specific error messages, or contact the Workshop Software support team for assistance.

With the Change Price Option, which price does Workshop Software treat as the Burson price?
The quote price shown for the part in the Burson cart. This is the same price Workshop Software has always brought across from Burson.

Why does my line show my own price instead of the Burson price when a Change Price Option is set?
Once a Change Price Option is chosen, the line follows your Product's Retail Price. If you want the Burson price on the line every time, choose Always use Burson Price.

Will changing the Change Price Option update prices on Job Cards I have already created?
No. The option only applies to parts you bring back from Burson after you click Save.

Does the Change Price Option work when I add Burson parts to a Booking?
Yes. The option works the same way whether you add Burson parts to a Job Card, an Invoice or a Booking.

Can I go back to having no Change Price Option selected?
No. The dropdown has no blank choice once an option has been saved. Choose Dont change the price to keep your Retail Prices as they are.

Does the Change Price Option apply to Burson invoices that download automatically?
No. The Change Price Option only applies to parts you bring back from the Burson cart onto a Job Card, Quote or Booking.

Can I disconnect this integration later?
Yes. You can disable or disconnect the integration at any time through the integration settings in Workshop Software. Disconnecting does not delete any data that has already been synced.

Also Explore

Was this article helpful?